Getting Started

First Boot Checklist

  1. Power on the device and wait for the system to boot fully.
  2. Connect a client to lan2, lan3 or lan4, or join the Wi-Fi.
  3. Open the web UI in a browser: http://192.168.1.1.

Default Access

  • Admin username: root
  • Admin password: not set on first boot
  • Default LAN IP: 192.168.1.1
  • Default SSID (2.4 GHz): OpenWrt-2.4Ghz
  • Default SSID (5 GHz): OpenWRT-5Ghz
  • Wi-Fi security: open (no password) until you configure it

Secure the router immediately

The reference defaults ship an open Wi-Fi and an empty root password. Set a root password and WPA2/WPA3 key before connecting the router to the internet.

Ports

Port Role
lan1 Ethernet WAN (default WAN uplink)
lan2, lan3, lan4 LAN, bridged into br-lan

The LTE modem is the primary WAN in the shipped config: wan is a QMI interface on /dev/cdc-wdm0 with APN internet. If you want Ethernet WAN instead, change network.wan to proto dhcp on device lan1.

First things to change

  1. Root password — System → Administration.
  2. Wi-Fi country, SSID and key — Network → Wireless.
  3. APN — http://192.168.1.1/apn.html or Network → Interfaces → wan.
  4. Timezone — System → System → General Settings.

Modem tools

Tool Where
Signal / operator info Modem → 3ginfo
SMS Modem → SMS Tool JS
APN quick page http://192.168.1.1/apn.html
ModemManager CLI mmcli -L, mmcli -m 0